- Merk: Aritech
- Productcode: TX-6010-03-1
- Levertijd: Price / delivery time on request
To order and view prices you must register or login.
Draadloze Rook/Hitte Detector, 868AM GEN2
The TX-6010-03-1 is a wireless smoke / heat alarms, designed for use in a
residential intrusion system with a compatible receiver understanding
the 868AM Gen2 protocol.
The device has a test button surrounded by a status LED and a built-in
sounder for alarm indication. The status LED flashes red every 45
seconds to indicate normal status (no alarm). When smoke or heat is
detected (as configured), the status LED changes from flashing to
continuously on, the built-in sounder is activated, and an alarm signal
is sent to the control panel.
The test button itself can also be used to silence the internal sounder
in case of a low battery alert and is, of course, used when performing a
sensitivity and alarm test. The test button can even be used to perform
a remote monitoring station alarm test.
The device sends a supervisory signal to the receiver every 15-18 minutes to report its status.
In addition to the above the device also has a tamper switch that
triggers a tamper signal transmission when the device is removed from
its mounting base and also performs a self-diagnostic monitoring the
sensitivity and operation status of the device.
The configuration switch hidden behind the batteries, can be used to
select the sounder tone and volume. Another set of switches help to
select the smoke and/or heat as well as their associated sensitivity
levels.
We also have siting guidelines helping the installer to define where to put these devices in a residential application.
- Option to select one technology only (heat or smoke) or both technologies (heat and smoke)
- Can also be used as a standalone detector
- Built-in sounder
- Test button surrounded with status LED
- 8 selectable sounder tones
- 5 years estimated battery life running on 2 batteries
- 2 additional battery slots available to further extend battery life
- Supervisory signal every 15-18 minutes
- Max. RF output 14 dBm (25 mW)
- 14604:2005/AC:2008 and BS 5446-2:2003 certified
| Article | |
| Brand | Aritech |
| Product Code | TX-6010-03-1 |
| Physical | |
| Physical dimensions | 109 x 62 mm |
| Colour | White |
| Info | |
| Sensor type | Heat, Smoke |
| Built-in sounder | Yes |
| Sounder output | 85 dB at 3 m (continuous tone) |
| Status LED | Yes |
| Sensitivity | High: 0.08 dB/m / Low: 0.12 dB/m (smoke) ; High: 58°C / Low: 72°C (heat) |
| Wired/wireless | |
| Wired-wireless | Wireless |
| Wireless frequency | Interlogix 868 MHz Gen 2 |
| General | |
| Certification | EN14604 |
| Standards & regulation | |
| Compliancy | CE |
| Standards | BS5446-2 |
| Environmental | |
| Operating temperature | -10 to 55°C |
| Vandal proof | Yes |
| Relative humidity | Up to 90% noncondensing |
| Storage temperature | 0 to 30°C |
| Electrical | |
| Batteries | 2 x 3 V (CR123A or DL123) / 5 to 10+ years (estimated battery life, depending on number of batteries fitted) (estimated battery life) / Audible alert every 45 s (low battery indication) |
| Operating voltage | 2.4 to 3.3 VDC |
| Battery lifetime | 5 to 10 years |
| Current consumption | 30 µA (standby) / 200 mA (alarm) / 60 mA (test) |