Autonomous power system for CCTV - 2x 150W solar panel - LiFePo4 battery 1920Wh (150Ah) 12/24VDC output - Integrated MPPT regulator - Support for anchoring on the mast - RS-485 for communication
  • Brand: Safire
  • Product Code: SF-SOLARKIT-BATT-1920WH-24V
  • Availability: In Stock
Om te bestellen en prijzen te kunnen zien moet u zich registreren of inloggen.
To order and view prices you must register or login.

Autonomous power system for CCTV - 2x 150W solar panel - LiFePo4 battery 1920Wh (150Ah) 12/24VDC output - Integrated MPPT regulator - Support for anchoring on the mast - RS-485 for communication

SAFIRE's autonomous power supply systems are the best solution for CCTV in off-grid environments, such as construction site surveillance, photovoltaic parks or any type of installation.

These all-in-one kits consist of solar panel and lithium battery with integrated MPPT regulator (to optimize the power of the solar panel). This makes installation simple and construction time short. Communication with third parties via RS485 protocol is also possible.

They are available in a wide range of capacities (from 256Wh to 2560Wh) to serve different energy needs, depending on the equipment located and the location of the installation. The SF-SOLARKIT-BATT-1920WH-24V kit also features dual output 12/24VDC for equipment that requires it.

  • Safire
  • Stand-alone power supply system for CCTV
  • 2x 150W solar panel
  • 1920wh LiFePo4 battery with 2000 charge and discharge cycles
  • Integrated MPPT regulator
  • Maximum output power 80W
  • RS485 communication for third-party integration
  • Mast bracket included
  • IP67 protection rating
  • 12/24 VDC output



  • 2x Solar panel 150W
  • LiFePo4 battery 1920Wh
  • Mounting accessories
  • Assembly instructions
  • Compass for orientation

alt


System technical information
Solar panel module 2 x 150W
Battery Lithium LiFePo4 1920wh
Solar input voltage 18V
Charging voltage 14.6V
Maximum input power 300W
Maximum charging current 8A
Maximum output power 80W
Regulator Integrated MPPT with 12/24 VDC output
Communication RS485 (For third party integration). Provides all system information such as charge level, system status or consumption
Output voltage 12/24VDC Integrated regulator (With standard Jack connector compatible with CCTV cameras)
Bracket Support for anchoring on mast or vertical infrastructure
Diameter of the mast 100 - 200 mm
Dimensions 2000 x 1036 x 724 mm
Weight 67.3 Kg (With battery)
Solar panel
Isc (Short circuit current) 16.66A
Voc (Open circuit voltage) 22.2V
Power 2 x 150W
cells 182 monocrystalline
Optimum voltage 18V
Glass thickness 3.2mm
Power tolerance (W) ±3%
Maximum load capacity 60 m/s (5Kg/sg.m)
Permitted hail load 23m/s, 7.53g
Efficiency 21.8%
Module dimensions 1040 (W) x 30 (H) x 621 (D) mm / panel
Temperature range -40ºC ~ 85ºC
Degree of protection IP67
Battery
Charging current 20A
Charging voltage 14.6V
Output voltage 12/24 VDC
Material LiFePo4
Capacity 150Ah (1920Wh)
Nominal voltage 12.8V
Operating temperature Charge: 0°C to 60°C (32°F to 140°F) Discharge: -20°C to 60°C (-4°F to 140°F)
Cycles >2000
Degree of protection IP67