Autonomous power system for CCTV - 2x 200W solar panel - LiFePo4 battery 2560Wh (200Ah) 12/24VDC output - Integrated MPPT regulator - Support for anchoring on the mast - RS-485 for communication
  • Brand: Safire
  • Product Code: SF-SOLARKIT-BATT-2560WH-24V
  • Availability: No Stock
Om te bestellen en prijzen te kunnen zien moet u zich registreren of inloggen.
To order and view prices you must register or login.

Autonomous power system for CCTV - 2x 200W solar panel - LiFePo4 battery 2560Wh (200Ah) 12/24VDC output - Integrated MPPT regulator - Support for anchoring on the mast - RS-485 for communication


SAFIRE's autonomous power supply systems are the best solution for CCTV in off-grid environments, such as construction site surveillance, photovoltaic parks or any type of installation.

These all-in-one kits consist of solar panel, lithium battery with integrated MPPT regulator (to optimize the power of the solar panel) and bracket for installation on a mast. This makes installation simple and construction time short. Communication with third parties via RS485 protocol is also possible.

They are available in a wide range of capacities (from 256Wh to 2560Wh) to serve different energy needs, depending on the equipment located and the location of the installation. The SF-SOLARKIT-BATT-2560WH-24V kit also features dual output 12/24VDC for equipment that requires it.


  • Stand-alone power supply system for CCTV
  • 2x Solar panel of 200W
  • Battery LiFePo4 of 2560Wh with 2000 charge and discharge cycles
  • Integrated MPPT regulator
  • 80W Maximum output power
  • Communication RS485 for third-party integration
  • Mast support included
  • Degree of protection IP67
  • Output 12/24 VDC



  • 2x Solar panel 200W
  • LiFePo4 battery 2560Wh
  • Mounting accessories
  • Assembly instructions
  • Compass for orientation

alt


System technical information
Solar panel module 2 x 200W
Battery Lithium LiFePo4 2560wh
Solar input voltage 18V
Charging voltage 14.6V
Maximum input power 400W
Maximum charging current 8A
Maximum output power 80W
Regulator Integrated MPPT with 12/24 VDC output
Communication RS485 (For third party integration). Provides all system information such as charge level, system status or consumption
Output voltage 12/24VDC Integrated regulator (With standard Jack connector compatible with CCTV cameras)
Bracket Support for anchoring on mast or vertical infrastructure
Diameter of the mast 100 - 200 mm
Dimensions 2000 x 1036 x 724 mm
Weight 67.3 Kg (With battery)
Solar panel
Isc (Short circuit current) 22.2A
Voc (Open circuit voltage) 22.2V
Power 2 x 200W
cells 166 monocrystalline
Optimum voltage 18V
Glass thickness 3.2mm
Power tolerance (W) ±3%
Maximum load capacity 60 m/s (5Kg/sg.m)
Permitted hail load 23m/s, 7.53g
Efficiency 21.8%
Module dimensions 1223 (W) x 38 (H) x 878 (D) mm / panel
Temperature range -40ºC ~ 85ºC
Degree of protection IP67
Battery
Charging current 20A
Charging voltage 14.6V
Output voltage 12/24 VDC
Material LiFePo4
Capacity 200Ah (2560Wh)
Nominal voltage 12.8V
Operating temperature Charge: 0°C to 60°C (32°F to 140°F) Discharge: -30°C to 60°C (-22°F to 140°F)
Cycles >2000
Degree of protection IP67